Відео

I saw you posted earlier that you have a CForce 600 Touring and a Kymco 450. I have a ‘22 CForce Overland and my sim has a Kymco 450i MXU. I’ve been using a 6x10 utility trailer to hall them (side by side) which isn’t idea. I’d like to be able to park on a trailer nose to tail. Do you have any idea what size would be needed to do this? I see that’s what you do. Any info would be great! Thanks

The best detailing channel!

I’d like to thank you. Informations are simple and effective for an ordinary man like me…

That exact tool saved me yesterday on a Mercedes S class. It had a light scratch on one of the doors. When i measured the paint there it became apparent that somebody had already shaved off lots of clear in an attempt to remove the scratch. I was left with 74 microns (rest of car 110-150 microns) to play with so i gave it a quick few passes with 3D ONE and a medium pad which made it a little less noticeable and i explained to the customer that it was too dangerous to go any further. Without the tool i would have gone for the heavy cut and wool pad and likely burned through the clear or left so little clear that it would have failed in the near future.

What do you recommend the minimum thickness be for a clear coat? anything under 4? What would a freshly painted panel be 6+? I could use that gauge to also look for resprayed body panels on vehicles i buy. Im just trying to learn so if you could please shine some light on what you believe is the safest range that would be great!! Im looking for 98-02 Trans am's similar to mine in my picture and with these cars being older no telling what kind of bullshit they've been put through with previous owners.

What product did you use at the 8:08 mark and why did you wipe the car with it before you started the ceramic coating?

8:25 what brand pump sprayer is this?? Thanks in advance👍🏻

Please let me know any updated links I don’t want to buy wrong one please sir

Do you have an updated link sir

What did you use to dress the plastic trim?

That was pretty impressive 👍👍

When you spray the door jams does it damage the speakers?

I plan to pick up either the spta v2 polisher or the shine mate. Which polisher do you recommend? I notice in many videos after this one I see you using the spta polisher still majority of the time? Should I go with the spta v2? Please lmk. Your opinion means a lot! Thanks!

Great video. What is the estimated timeframe for each stage of the car detailing process, including washing, polishing, and coating?

Not related to rubber, but since you used the "0000" steel wool, it works WONDERS on chrome! On my 2022 BMW motorcycle, I use a light touch with a dry "0000" steel wool on my chrome surfaces, and it removes bugs, spots, etc., like magic. For rusty chrome, WD-40 and "0000" steel wool helps to remove the rust and polish the chrome. I did this with my 1976 Honda CB500t to great effect.

Great job 👍. Very informative. You guys get a lot of big trucks. That's some hard work 💯🔥

Excellent video with great tips. The truck turned out amazing as you two always do excellent work. I have foamed CarPro Descale before and the results were not very good but I have had excellent results using Descale for the agitation wash. Keeping a microfiber in the wash bucket for agitating DIY water spot remover gives me great results. The paint depth gauge is a very important tool for me. I see a lot of customers buying eight to ten year old used cars and wanting a ceramic coating. It is common to see paint depth readings range from 2.3 to 5.8 in the same vehicle. Immortal has been popular for me too and the vehicles look amazing afterwards. Thank you for the video.

I have a paint depth gauge but on my two boys cars I have no history on how thick the paint was new, the truck turned out amazing, nicely done Phil 👍😁

Damn the CSL beads the soap like crazy😯😯😯 do other coatings like diy detail, carpro, gyeon have the same effect? I have never seen a coating beads the soap like that

Hi Phil, I have the same guage. I love that you can create reports with photos and email it. But an unexpected use for me was searching for cars for my kids. Quickly identifies another coat of paint which points to a possible accident. Shows up body filler. Well worth it if you’re going to buy a vehicle, never mind the top coat benefits.

When u use 3ds waterspot remover do u need 2 flush the area u treated?

Came out amazing as always

Amazing video and product review/tutorial/content good friend

Great video as always. I like your no nonsense approach. A straight shooter. Thx for the effort guys. If you havent tried Starke Venom for waterspots, give it a go and thank me later

Great job as usual Phil 👏🏼

Truck is looking great. Awesome job

The truck came out looking fantastic!

How long did the whole process take?

Turned out great.

I have a question what type of handheld light are u using to inspect the paint

Hi folks. The truck looks fantastic. The truck is very large. Phil, what did you do with the tonneau cover? Couldn't tell what kind of material it was. Tonneau covers are getting more popular up here. I even have one myself. Do you have to spray water on the paint to clean up the spot remover or just mop up? Thank you for the video. Hi wife.

Really beautiful truck ….great job on it as usual ….i have a question….i own a 2001 beetle with only 40,000 miles on it ….i hand wax it every three months or so with meguires cleaner wax and Lucas slick mist ceramic detailer in between ….if i coat car with Adams iron remover and powerwash off will it take off all my wax and ceramic sealing and shine ????

Wow Suprised with the results by papa cut! Looks really good! The papa cut is almost an all in one compound that gets rid of some good effects in the paint! Great job Phil!

Phil, I have a question: for lite dust on the car, can you use a Swiffer duster? Thanks, Phil

Always a pleasure. Great result on the pickup. Till the next one.

I want to dedicate this next song to you guys,actually play it a little before finishing every job,Simply The Best from Mrs Tina Turner.

another great video and advice.

Nice lesson always

Welcome back Sir/Madam🙏🫡❤️

First!!!

I’ve been using DIY detail coatings since the beginning I’ve been very happy with all the results! Great video I’m sure your customer will be very happy!

Phil, I have so many of your videos in my "watch later" list that it's not even funny. Super informative.

Tea tree oil works and will kill everything without messing up the trim. I applied twice and those spots are about 85% gone will do another treatment and then use a trim restorer.

I don’t like how long it is. 😮 That’s what she said !

I love this 4 runner!! Thank you for the video!

Thanks everyone 4K Subscribe

very nice sir I m from India and you

Tony Stark showing us wrapping his next suit.

That’s one nice truck, I have DIY Detail on my truck, it’s been over a years and it’s like day 1 without toppers.

Always a pleasure watching and learning from your videos Phil. The vehicle came out looking amazing , hope you and everyone has a great weekend.